Oasis WP2P

The Oasis WP2P is a hand pressure pump that is an ideal alternative to a cast iron pump. The Oasis WP2P can be used as a backup to an electric pump during a power failure or where there is no electricity. This product is proudly made in the USA and Canada using ABS, PVC, brass and stainless steel materials, making it light weight and resistant to rust and corrosion.

This product is Out of Stock until September 2020

$269.95

Out of stock

Email when stock available

Oasis WP2P Hand Pressure Pump

The OASIS WP2P shallow well hand pressure pump for pressurizing a tank or pumping water into and overhead storage tank.

The Oasis WP2P has a glued together upper body

If you want a different handle orientation than shown in the photo, just send us a message describing the desired handle position and we will take care of it for you.

Oasis WP2P Description

The Oasis WP2P hand pressure pump is an ideal alternative to a cast iron pump. This hand pump can be used as a backup to an electric pump during a power failure or where there is no electricity (see specification below).

  • The Oasis WP2P hand pressure pump is made in the US and Canada from ABS, PVC, brass and stainless steel materials. It is light weight and will not rust or corrode.
  • Produces up to 40 psi of discharge pressure, and can push water up to 82 feet overhead.
  • The closed design helps prevent contaminants from entering a well. Includes T fitting and shutoff valves for easy priming.
  • The base can be mounted to any strong horizontal surface using four 1/4″ fasteners, a 3″ center hole is required.
  • The hand pump simply sits in the base, and if the waterlines are connected using our AGI-100A unions, the pump can easily be disconnected, removed and then reinstalled and reconnected as needed.

NOTE – this pump does not drain by lifting the handle all the way up.

Oasis WP2P Specifications

 

Height above platform 24″ (60 cm)
Length below platform 8″ (20 cm)
Base diameter 7″ (17.5 cm)
Cylinder ID (inside diameter) 2″ (5.0 cm)
Brass plunger has 2 cup leathers
Weight 7 lbs (3.2 kg)
Discharge port 1″ female national pipe thread with vermin screen
Inlet port 1″ female national pipe thread
Capacity 3 gpm (13.6 lpm) at 60 double strokes per minute
Maximum discharge height 82′ (25 meters)
Maximum suction lift 22′ (7 meters)

Suction lift is the vertical distance from the pump to the surface of the water, and this distance decreases with altitude above sea level – see chart below

Oasis WP2P Maximum Suction Lift 

Altitude Suction Lift at Sea level 22.0 ft

  • 1000 ft 20.8 ft
  • 3000 ft 18.4 ft
  • 5000 ft 16.0 ft
  • 7000 ft 13.6 ft
  • 9000 ft 11.2 ft

Oasis WP2P Diagrams

oasis wp2p hand pump

Related Readings

How to Secure your Off-Grid Emergency Water Source

 

Reviews

There are no reviews yet.

Be the first to review “Oasis WP2P”

Your email address will not be published. Required fields are marked *

Name
Email
Phone
Enquiry

Join our Preparedness Community

Over 10,000 survivalists are receiving special deals and preparedness updates in our mailing list!