GV-4 (4A 12V MPPT Controller)

Small, critically efficient, and cost effective, the GV-4 gets more from every panel.

  • 99.85% peak efficiency
  • High-speed MPPT
  • Advanced electronic protection
  • Tiny self-consumption (0.12mA)

$65.00

Description

Genasun GV-4-Pb-12V: 4A, 12V MPPT Controller For 12V Lead Acid Batteries

Overview

  • 99.85% peak efficiency
  • High-speed MPPT
  • Advanced electronic protection
  • Tiny self-consumption (0.12mA)

Mission-Critical Reliability

This 12v MPPT Controller will provide reliability in the most extreme applications. Genasun controllers are deployed to the most remote locations on earth. They endure years at sea, harsh Antarctic winters, freezing conditions in the upper atmosphere on solar-powered airplanes, and in a few off-the-map locations. Made in the USA, each controller is put through complete electrical testing to ensure reliability. If you need mission-critical power, this is your controller.

High-Speed MPPT: Always on Target

Not all Maximum Power Point Tracking controllers were created equal. Most use a sweep and sleep method that scans the entire voltage range every 30-60 seconds. That’s okay for a clear day, but traditional controllers are constantly off target during changing cloud conditions – exactly when power is scarce and is needed the most. Genasun controllers adapt to changing light conditions 20 times every second. They are always on target, capturing every bit of available sunshine. Simply put, other controllers can’t keep up. This proven 12V MPPT Controller is optimal for lead-acid batteries.

Custom Voltages Available

A custom charge profile for lead-acid batteries can be programmed at the factory to match the specs of your lead-acid battery. To order a Custom Voltage controller,  email us at [email protected]

Features

Surviving the Storm with Low Power Burn

Every controller uses power. While a typical PWM controller burns 9mA, the Genasun GV-4 burns a scant 0.125mA. That slow burn is perfect for waiting out a snow-covered panel, or a few bad weeks of clouds.

Partial Shade – In-City Applications

Genasun controllers shine in partial shade. The 50% power increase from Genasun’s advanced MPPT is often enough to prevent system downtime from partial shade. From street signs and tree branches, to coffee cups and stickers placed on panels by pedestrians, Genasun MPPT keeps partially shaded solar panels generating more power than any other controller.

Steady Power Source

Life is unpredictable. PWM controllers amplify that unpredictability. A small amount of shade can drop PWM power output to 2/3’s of what a Genasun MPPT controller can draw from the same panel. By constantly adapting to changing light conditions, Genasun’s advanced MPPT controllers provide a steadier source of power, keeping your system running in uncertain weather.

Radio Silence

Most MPPT solar charge controllers broadcast Radio Frequency noise from the DC/DC conversion circuit. Unfiltered inputs and outputs waste energy and interfere with nearby or attached electronics. Genasun worked to eliminated RF emissions from our line of charge controllers. During third-party testing for FCC compliance, the test engineer asked us, “Is it on?”. Mission accomplished.

No Fans. No Relays.

Fans get clogged with dust and dirt. Relays eventually stop switching. Genasun controllers use advanced electrical design that obsoletes these parts. With fewer moving parts to wear out, Genasun controllers outlast the competition.

Fault Tolerance

Electronic reverse-battery protection.

Electronic reverse-panel protection

Check out similar charge controllers here! 

Specifications

Specifications
Maximum Recommended Panel Power 50W
Rated Battery (Output) Current 4A
Nominal Battery Voltage 12V
Max Input Voltage 27V
Recom. Max Panel Voc at STC 22V
Minimum Battery Voltage for Operation 7.2V
Input Voltage Range 0-27V
Maximum Input Short Circuit Current 4A
Maximum Input Current** 7A
Charge Profile Multi-Stage with Temperature Compensation
Absorption Voltage 14.2V
Absorption Time 2 Hours
Float Voltage 13.8V
Charging Output Voltage Range 7.2-18V
Charging Output Voltage Range 7.2-18V
Battery Temperature Compensation -28mV/°C
Operating Temperature -40°C – 85°C
Maximum Full Power Ambient 50°C
Electrical Efficiency 96%-99.85% typical
Tracking Efficiency 99% typical
MPPT Tracking Speed 15Hz
Operating Consumption 0.125mA(125uA)
Night Consumption 0.09mA (90uA)
Environmental Protection IP40 (Nickel-Plated Brass & Stainless Hardware)
Connection 4-position terminal block for 12-30AWG wire
Weight 2.8 oz., 80g
Dimensions 4.3 x 2.2 x 0.9″, 11 x 5.6 x 2.5 cm
Warranty 5 years

Reviews

There are no reviews yet.

Be the first to review “GV-4 (4A 12V MPPT Controller)”

Your email address will not be published. Required fields are marked *

Name
Email
Phone
Enquiry